Get the Properties You Need with Zeotherm® TPVs

Zeotherm TPVs are comprised of heat- and oil-resistant thermoset elastomers dynamically vulcanized in a plastic matrix. The result is a series of TPVs with the processing ease of thermoplastics and the physical properties of high-performance rubber.

The Zeotherm 100 Series is based on polyacrylate (ACM) elastomers dispersed in a polyamide (nylon) plastic matrix, with hardness ranging from 60 Shore A to 90 Shore A. Extensive long-term testing has proven grades in this series can survive continuous use, in both air and several automotive fluids, at 150°C and short-term excursions to 175°C. Zeotherm 100 Series grades are optimized for injection molding.

Zeotherm 120-90B, 130-90B and 131-90B, also based on polyacrylate (ACM) elastomer in a polyamide plastic matrix, are optimized for blow molding via extrusion, co-extrusion, suction, injection, or press-blowing processes. Zeotherm 120-90B is recommended for small blow molded parts, including driveline and steering boots (CVJ, propshaft, steering). Zeotherm 130-90B and 131-90B are recommended for blow molding large parts, such as clean air ducts and charge air cooler ducts. Zeotherm 131-90B is designed for applications seeing temperatures above 150°C.

Product Data Sheets + MSDS are available via the links below

(registration is required).

Zeotherm 100-series MSDS (USA and International Version)
Zeotherm 151-40D MSDS
Zeotherm 100-series MSDS (Europe Version)
To obtain the MSDS for additional grades of Zeotherm, please contact your Zeon representative or email zeotherm@zeonchemicals.com.